SHANDONG YUELONG
RUBBER&PLASTIC TECHNOLOGY CO.,LTD.
Products
Products Type  

Flexible Choke & Kill Hose JYG-SZ

• application:

api 16c choke kill line is an imptance part in choke kill system, which is an integral part of surface subsea blowout prevention equipment. 1. this hose allows to pump fluid to the well when nmal circulation through the drill string cant be employed; 2. additionally the choke line manifold provide a means of applying back pressure on the fmation while circulating out fmation fluid influx into the well be following a kick; 3.sour service

• stard: api spec 16c

• hose structure :

internal tube: particular polymer engineering plastic as inner sealing tube

internal rubber liner: hnbr based inner sealing elastomer, which is good f fluid with h2s, oil resistance, crosion resistance, high temperature resistance, gas permeation resistance

breaker layer external protection layer: high tension textile fabric

reinfcement f maj pressure withst: high strength steel cable

fire shield layer: glass fiber cloth

cover: neoprene rubber based cover layers, fire resistance, wear resistance, oil resistance, ozone & ageing resistance, uv resistance which is applicable f critical marine environment

• hose passed verification test specified in clause b12 of api 16c

• heat trace cable can be assembled by functional requirement

• different option of external protection layer are available as request by our recommendation accding to operation condition, f example stainless steel arm outer wrap, embedded stainless steel wire in cover, polyethylene spiral guard, etc.

• metal connects: meet nace mr0175 / iso 15156

• wking temperature range: class ⅱ , -25 to +100 ℃

• flexibility specification level: fsl3

• maximum length: 70m

• length tolerance: length up to 6.4m, with tolerance ± 64 mm; length longer than 6.4m with tolerance ± 1%

• measurement basis of minimum bending radius (mbr) is center line of each hose

KeyWord:Flexible Choke & Kill Hose
 +86-535-2615988
 Contact us

• application:

api 16c choke kill line is an imptance part in choke kill system, which is an integral part of surface subsea blowout prevention equipment. 1. this hose allows to pump fluid to the well when nmal circulation through the drill string cant be employed; 2. additionally the choke line manifold provide a means of applying back pressure on the fmation while circulating out fmation fluid influx into the well be following a kick; 3.sour service

• stard: api spec 16c

• hose structure :

internal tube: particular polymer engineering plastic as inner sealing tube

internal rubber liner: hnbr based inner sealing elastomer, which is good f fluid with h2s, oil resistance, crosion resistance, high temperature resistance, gas permeation resistance

breaker layer external protection layer: high tension textile fabric

reinfcement f maj pressure withst: high strength steel cable

fire shield layer: glass fiber cloth

cover: neoprene rubber based cover layers, fire resistance, wear resistance, oil resistance, ozone & ageing resistance, uv resistance which is applicable f critical marine environment

• hose passed verification test specified in clause b12 of api 16c

• heat trace cable can be assembled by functional requirement

• different option of external protection layer are available as request by our recommendation accding to operation condition, f example stainless steel arm outer wrap, embedded stainless steel wire in cover, polyethylene spiral guard, etc.

• metal connects: meet nace mr0175 / iso 15156

• wking temperature range: class ⅱ , -25 to +100 ℃

• flexibility specification level: fsl3

• maximum length: 70m

• length tolerance: length up to 6.4m, with tolerance ± 64 mm; length longer than 6.4m with tolerance ± 1%

• measurement basis of minimum bending radius (mbr) is center line of each hose


638064389921428703.jpg